< Back
No se ha encontrado ningún artículo.
No se ha encontrado ningún artículo.

Thickness Measurement and Flaw Detection (EMAT, DCUT)

Los sensores EMAT permiten realizar mediciones sin contacto ni suplantación de -30 ºC a 650 ºC en la mayoría de los materiales metálicos. Los sensores DCUT permiten realizar mediciones sin contacto en componentes metálicos y no metálicos.
Esto es un texto dentro de un bloque div.
Esto es un texto dentro de un bloque div.
Esto es un texto dentro de un bloque div.
CODA :: Fast Precise Thickness Measurement
Thickness Measurement at Extreme Temperatures with CODA

Innerspec’s patented EMAT pulser technology and sensors permit using EMAT, DCUT, and conventional transducers from any manufacturer. EMAT sensors from Innerspec permit thickness measurement and normal beam (0⁰) flaw detection on most metallic components without contact or couplant at extreme temperatures (from -30⁰C to 650⁰C) and of rough, dirty, oxidized, and coated surfaces down to 0.3mm in thickness. DCUT sensors from Innerspec provide no-couplant measurement on both metallic and non-metallic components.


EMAT (Transductor Electro-Magnético Acústico)

  • Técnica EMAT sin contacto.
  • Gran precisión (12.7µm-0.0005”) y resolución (hasta 3mm-0.125”).
  • Apto para temperaturas desde -30ºC hasta 650ºC sin refrigeración activa.
  • Capable of inspecting metals as thin as 0.3mm (0.010”).
  • 10+ sensor options for different applications.
  • Roller kits, encoders, and adaptors for different applications.


  • Solución piezoeléctrica sin acoplante (100% seco).
  • Gran precisión (12.7µm-0.0005”) y resolución (hasta 1mm-0.040”).
  • Available sensor options:
    - Flexible, low-profile (2mm).
    - Remote inspection with extension pole.
    - Roller wheel.

Software Upgrades

  • Malla de espesor (thickness grid)
  • Mapeo de espesores/corrosión

Related Instruments

The following instruments are recommended for this application.


Standard EMAT and DCUT Sensors and Accessories for the most common applications (normal beam, guided waves, angled beam)

If you would like any more information on this system, please contact us, and one of our experts will be in touch.